Featured%20Article

Featured Article

5 Fall Maintenance Musts to Take the Chill Off Winter Costs

fall-blog

Between day-to-day operations and unexpected emergencies, on-the-ground building managers have their plates full. But savvy facility managers understand that having a fall checklist in place can be crucial to avoiding more serious issues when the hard months of winter hit. Using a maintenance system with built-in capabilities for quarterly reminders and preplanned work orders can greatly improve the likelihood that on-site building staff won't put off these crucial preventative measures — or overlook them altogether.

Here are five fall maintenance areas that can help alleviate future problems and add up to big winter cost savings through increased energy efficiency.

1. Roof

Adequate roof maintenance not only reduces leaks but also extends the life of your roofing system. During winter months, roofing contractors are in high demand to correct problems from snow and freezing that can rapidly escalate. A fall inspection for damage or deterioration will ensure that problem areas are addressed before the temperature drops. FEMA also recommends creating a Snow Event Response Plan to negate any risk of structural failure after an unusually severe storm.

2. Gutters & Downspouts
During the fall and before winter is a good time to take a look at the state of your gutters and downspouts to evaluate any maintenance or repair needs. This may involve clearing out leaves or debris, checking for holes and inspecting downspouts for any signs of leaks. Catching issues early on will prevent your gutters from not functioning properly when you really need them.

3. Fenestration
Addressing air leaks around windows, exterior doors and skylights (collectively known as fenestration) can significantly reduce heating bills. Caulk and weather stripping ensure that warm air stays inside the building during the winter and seals the exterior building envelope from water penetration and leaks. A study by the National Institute for Standards and Technology showed that air infiltration has significant impact on building heating loads – on average 15 percent of the total heating energy. Proper improvements can mean up to a $2,000 per year savings in a 20,000-square-foot building.

4. Exterior Site Concrete & Asphalt
Water that freezes inside the cracks of exterior concrete and asphalt can cause the pavement to spall and deteriorate, leading to future repair expenses. In addition, water penetration can cause the subgrade to soften, creating settlement and potholes. Yet it's exactly this type of wear and tear that's so easy to overlook without a proper maintenance-tracking platform. Patching cracks and gaps in the fall will reduce costly repairs needed the following spring.

5. HVAC
On-site building staff might only turn their attention to thermostats when the HVAC system is on the fritz, but they could be missing something. If your energy-tracking system shows that the building's energy use is climbing, it should trigger a thermostat inspection. If thermostats are not calibrated correctly, the heating system will not run as efficiently as it could, which can lead to unnecessary energy use and utility costs. Taking that one step further, installing programmable thermostats that drop the temperature 10 to 15 degrees when the building is vacant could cut your heating costs by an average of 10 percent. Don't overlook the importance of replacing air filters on a regular schedule. Dirty filters restrict airflow and hamper efficiency.

Would you like to learn more about preparing for every season at your facility? Explore our many maintenance solutions across industries.